Find Your Part:
Search
OR


Return to Parts List

Category : D- Big Block (Low Deck) : Camshaft : Flat Tappet, Hydraulic : Street/Strip

HUG SEH4652BL-8

BB HYD FLAT TAPPET CAM 246/252 -108šLSA

LOBE LIFT .382"/.393"

$165.00

Flat tappet hydraulic big block "B/RB" camshaft.

Hughes "real" Chrysler cam

This is a one bolt cam. Three bolts are available as special order.

Basic guidelines  (These are not absolutes, just guidelines to help you get close on a cam choice)
Use: Race. Very high compression stock stroke or stroker engine. Fully race ported heads w/ oversize valves. Headers & performance intake.
Idle: Very Noticable
Vacuum:Low
Converter: 3400rpm +
Rear gear: 4.10 +
Benefits: Awesome mid range & top end power

         
Be sure to check out our NO FLAT CAM GUARANTEE!
       CLICK HERE BEFORE ORDERING

     

Related Parts:

Lifters: Standard performance use HUG 5001  High performance use HUG 5003

Valve Springs: For 1.5 or 1.6 ratio rockers use HUG 1106

Valve Locks: For 11/32" stem use HUG 1302    For 3/8" stem use HUG 1304

Retainers: For 11/32" stem use HUG 1203    For 3/8" stem use  HUG 1256

Rocker Arm Kits: On standard style heads use 1.5 ratio HUG 15103  For 1.6 ratio use HUG 15203

Break-in Oil: 5W30 JGP 01806    or  15W50 JGP 00106

Cam bolt & washer: HUG 7007

Timing Chain & Gear Set: 3 key way use HUG 6427 or for a 9 keyway use HUG 6434


 

Home | Phone: 309-745-9558 | Email: information@hughesengines.com