|Find Your Part:OR|
Return to Parts List
Category : E- Big Block (Raised Deck) : Intake Manifolds
INTAKE, TORKER II
DESIGNED FOR STREET 413-426-440 C.I.D (2500-6500 RPM)
TORKER II 440 (2500-6500 rpm)
Designed for street 413-426-440 c.i.d. Chrysler V8s. They measure 8.75" across block. Manifold not equipped with EGR. Will not fit 1962-64 Max Wedge heads.
Important... A/B Measurements
CHECKING FOR HOOD CLEARANCE
To ensure adequate hood clearance, check the height of your stock manifold and compare the "A" and "B" measurements against those of the Edelbrock manifold prior to purchase. The heights of all Edelbrock manifolds are listed under "Installation Notes" for each model in the intake manifold section of this catalog.
Please Note: To figure carburetor pad height, add dimensions "A" "B" and divide by 2.
This intake Manifold height: A-4.15", B-5.20", measured to engine block, see A/B Measurements in above photo. Port exit dimensions: 1.14" x 2.10".
A stock big block intake manifold has an "A" measurment of approximately 3.33" .
Will not fit 1962-64 Max Wedge heads. Carb center to carb center: 6-7/16". Manifold measures 8.75" across block. <
ARE AR002 THROTTLE BRACKET KIT 440
ARE AR008 BB THRTTL RETURN BRKT DUAL SPRNGS
Home | Phone: 309-745-9558 | Email: firstname.lastname@example.org