Find Your Part:
Search
OR


Return to Parts List

Category : A- Small Block "LA" : Camshaft

HUG SEH2428AL-11

SB HYD FLAT TAPPET CAM 224/228 -111šLSA

LOBE LIFT .345"/.353"

$165.00

Flat tappet hydraulic small block "LA" camshaft.

Hughes "real" Chrysler cam


Basic guidelines  (These are not absolutes, just guidelines to help you get close on a cam choice)
Use: Mild street performance or hot HP restoration engines. Likes some head work & oversize valves.
Idle: Smooth to noticable
Vacuum: Medium level
Converter: Stock to mild stall
Rear gear: 3.55 +
Benefits: Hotter daily driver.

    
Be sure to check out our NO FLAT CAM GUARANTEE!
       CLICK HERE BEFORE ORDERING


     


Related Parts:

Lifters
: Use high performance HUG 5003

Valve Springs: For any ratio rocker use HUG 1129 Note: Spring base must be machined flat on OEM heads. Both springs must set on the same surface.

Valve Locks: For 11/32" stem use HUG 1302    For 3/8" stem use HUG 1304 for single-groove, HUG 1346 for multi-groove.

Retainers: For 11/32" stem use HUG 1202    For 3/8" stem use  HUG 1252

Rocker Arm Kits: On standard style heads use 1.5 ratio HUG 15023  For 1.6 ratio use HUG 15063

Break-in Oil: 5W30 JGP 01806    or  15W50 JGP 00106

Cam Key: HUG 7542

Cam bolt & washer: HUG 7011

Timing Chain & Gear Set: 3 key way use HUG 6440 or for a 7 keyway use HUG 6442



Home | Phone: 309-745-9558 | Email: information@hughesengines.com