Find Your Part:
Search
OR


Return to Parts List

Category : A- Small Block "LA" : Camshaft

HUG STL7276AS-6

SB SLD FLAT TAPPET CAM 272/276 -106šLSA

.426"/.434" LOBE LIFT

$165.00

Flat tappet solid small block "LA" camshaft.

Hughes "real" Chrysler cam

 Basic guidelines  (These are not absolutes, just guidelines to help you get close on a cam choice)
Use: Drag Strip. Hi-rise single plane intake. Fully ported race heads. High compression. Very light cars or dragsters
Idle: Noticable
Converter: 5000 rpm +
Rear gear: 4.10+

    
Be sure to check out our NO FLAT CAM GUARANTEE!
       CLICK HERE BEFORE ORDERING

     


Related Parts:

Lifters
:  Standard lifters use HUG 5012  . For high performance lifters with EDM oil hole use HUG 5012EDM . Lightweight with EDM hole use HUG 5013XL

Valve Springs: All ratio rockers use HUG 1129 Note: Spring base must be machined flat on OEM heads. Both springs must set on the same surface.

Valve Locks: For 11/32" stem use HUG 1322    For 3/8" stem use HUG 1324

Retainers: For 11/32" stem use HUG 1203    For 3/8" stem use  HUG 1254

Rocker Arm Kits: On standard style heads use 1.5 ratio HUG 15023  For 1.6 ratio use HUG 15063

Break-in Oil: 5W30 JGP 01806    or  15W50 JGP 00106

Cam Key: HUG 7542

Cam bolt & washer: HUG 7011

Timing Chain & Gear Set: 3 key way use HUG 6440 or for a 7 keyway use HUG 6442

 

Home | Phone: 309-745-9558 | Email: information@hughesengines.com