• Catalog
• Instructions & Tech Articles
• Dyno Build-ups & Tests
• Customer Rides
• Dealer Locator
• Customer Service

Find Your Part: Search OR

Return to Parts List Category : A- Small Block "LA" : Stroker Kits HUG 435-RACE-KFH STROKER KIT, 340/435 SMALL BLOCK SMALL BLOCK 340 MAINS W/ 4.180" STROKE CRANK $3214.00 This is a premium kit including forged pistons, "H" beam billet rods with ARP2000 bolts, and a forged crankshaft. Naturally, all of the correct rings, main & rod bearings are included (as you would expect from us).  This kit is internally precision race balanced. We designed this kit for hot street/bracket racing where maximum torque is needed and a light bob weight for quick acceleration is desired. It can be installed in thew 340 "LA" block. This kit is designed for a 4.070" bore but but a larger bore can be ordered by calling us or making a note in the comments section of the order screen. The forged pistons are a step dish design giving a compression ratio of 10.45:1 with a 58cc chambered head and 9.87:1 with 65cc chambers. For more compression ask for our flat top piston. Our goal in designing this was a good premium pump gas ratio with either iron or aluminum heads. The forged crankshaft will have a standard 340 main bearing with NASCAR sized rod journals (1.889"). The stroke is 4.180". The lightweight rods will use lighter weight 0.912" pin diameter and will naturally be full floating. Minimal notching will be required to allow this kit to drop in. We strongly suggest that you use our main bearing support girdle with this long armed screamer. These kits will be internally, race balanced. Technical Data:   Bore: 4.070" (Larger bores available, 4.080" & 4.100") Stroke: 4.180" Rod Length: 6.123" Rod Weight: 628 grams Main Journal:2.500"   Rod Journal: 1.988" (NASCAR size) Ring Size: 1/16"-1/16"-3/16" Bob Weight: 1803 grams Compression Ratio with Step Dish Piston (figured with a .039"/9cc head gasket): 58cc head = 10.45:1 62cc head = 10"1 64cc head = 9.87:1 Optional High Compression Domed Piston; call for info Rod to Stroke Ratio: 1.464:1 Rod to block clearance: .030" in our test block with no notching. This is adequate clearance. Be sure and check your block! Girdle Clearance: The rod notches in our girdle will require a chamfer on the top side to clear the rods. NEED A CUSTOM DISH OR DOME? LET US KNOW WHAT YOU NEED, NO PROBLEM. Custom pistons are available for special applications.  (At an additional charge!) Call for info.   BEWARE lower price stroker kits are usuall incomplete! They lower they price by "forgetting" some parts. Such as main and/or rod bearings, piston tings, balancing, etc. Who are you going to get to balance your stroker kit? Or get chamfered bearings? They all come with our stroker kits.