Find Your Part:

Return to Parts List

Category : I- Slant 6 (170-225 c.i. 1960-1987)

HUG SMC1024I6-8

SLANT 6 WHIPLASH CAM 210/224 - 108+5



Whiplash Flat tappet solid Slant 6 camshaft.

Our Whiplash cam is designed for basically stock low compression engines. This cam will run on pump gas in a 426 Hemi with 9.25:1 or less compression and iron heads or about 10.5:1 with aluminum heads. If your compression is higher than this you may need to use a higher octane race fuel.  Your vacuum should be in the 9"-11" range using this cam.

Basic guidelines  (These are not absolutes, just guidelines to help you get close on a cam choice)
Use: Stock engines
Idle: Aggressive
Vacuum: Low
Converter: Stock to mild stall
Rear gear: Stock to 3.23
Benefits: Scares Mustangs & Camaros



Related Parts:

: HUG 5012EDM

Valve Springs: For 1.5 or 1.6 ratio rockers use HUG 1110

Valve Locks:  For 2 groove use HUG 1305   For 3 groove use  HUG 1306

Retainers: HUG 1252

Break-in Oil: 5W30 JGP 01806    or  15W50 JGP 00106

Timing Chain & Gear Set: HUG 6406S

Home | Phone: 309-745-9558 | Email: