SEARCH
Part Number
Keywords

Return to Parts List

HUG 5514-RB

INTAKE, MAGNUM V8 STAGE 1 OEM

98-03 INCLUDES VALLEY PLATE INSTALLED, INTAKE GASKETS & BOLTS

$465.00

98-03 Includes Valley Plate Installed, Intake Gaskets & Bolts

This fits 1998-2003  5.2/5.9L  V8 engines.

Stage I (approximately 14" runner length) This is best choice for heavy trucks and/or towing
You cannot tell from the outside appearance, but this stock looking manifold is milled, filled and ported. So what, you may ask. Porting is easy. For those of you with our Stage I, Stage II or Stage III throttle bodies or our ported Magnum heads, the intake manifold is the next restriction in the system. We modify the intake with porting and extended port matching (not gasket matched....there is a difference). This extended port matching eliminates the bottleneck of the original intake and matches the ports to our Stage I and Stage II Magnum heads. This means the intake can now supply all the air the heads can handle. The milling refers to the port runners being cut to a shorter length. This tunes the intake ram length to a higher RPM. The boost in cylinder filling will move up in the RPM range, which more closely matches the power ranges of performance cams, ported cylinder heads and larger throttle bodies. Filling the plenum area creates a stronger vacuum signal to the fuel injection. This stronger signal helps to offset the signal lost to large duration camshafts and large port throttle bodies. This manifold is the next step in increasing the power potential of the modified engines without having to go to the expense of a 4bbl throttle body system. The intake is supplied with a 1/4" thick aluminum, billet plenum cover plate installed to help prevent blowing the gasket out. Each intake also comes with a new Fel-Pro intake gasket kit and all new torque to yield intake manifold bolts. It's a complete kit!  See our Magnum Induction System Modification for more info on choosing the proper intake.
 
Customer Testimonial from J.B. in Kelso, WA;
   Hughes Engines,
       I installed your Stage 1 modified O.E.M. intake on my V6 Magnum along with your Stage 1 billet throttle body and they work great! I am very pleased with the results I got. It runs about 20 degrees cooler and I get about 20 mpg on the highway as opposed to my past of only 16-17 mpg.
      Thanks again,
               J.B.

    J.B.,
       Thank you for the nice letter. We always appreciate hearing from our customers. Especially with such great results. Would it be alright if we posted your letter on our website as a testimonial?
             Hughes Engines

      Hughes Engines,
          Go ahead I fully support your products.
                      J.B.

When placing your order we will need 5 pieces of information.
1. Year & Casting Number
2. EGR or no EGR
3. One or two coolant sensor ports
4. Number and size of vacuum ports on either side of the intake directly below the throttle body.
Each of these are referenced in the above photo.
5. Are we supplying a core or are you? If you want us to supply the core you must order part number 33302. There is a $300 core charge which is refundable when you send us your good core.

 

Home