Find Your Part:
Search
OR


Return to Parts List

Category : Small Block"LA" 273,318,340 and 360 engines : Intake Manifolds : Victor

HUG 2915DPM

EDEL #2915 INT W/ DEEP PORT MATCH

$532.03

Edelbrock High Rise Single Plane #2915

VICTOR 340 (3500-8000 rpm) With Hughes Deep Port Match work

Victor 340 is designed for 340-360 c.i.d. Chryslers using standard rectangular-port heads. For oval track and drag race engines operating from 3500-8000 rpm. Can be used on 318 c.i.d. engines with 340-360 heads. Will not fit 1992 and later Magnum engines.

This intake is best paired with our hydraulic grinds HEH4650AL, HEH5055AL, HEH5561AL and our solid camshafts HTL5256AS and larger.

Important... A/B Measurements
CHECKING FOR HOOD CLEARANCE

To ensure adequate hood clearance, check the height of your stock manifold and compare the "A" and "B" measurements against those of the Edelbrock manifold prior to purchase. The heights of all Edelbrock manifolds are listed under "Installation Notes" for each model in the intake manifold section of this catalog.

Please Note: To figure carburetor pad height, add dimensions "A" "B" and divide by 2.

This intake Manifold ht.: A-4.15", B-5.70" see A/B measurements in above photo.

Factory manifolds have an "A" measurement of approximately:
2 barrels---- 3.54"
4 barrels---- 3.96"

 

Installation instructions for intake can be found at this link. Installation Instructions

Related Parts:

ARE AR004 THROTTLE BRACKET KIT 360

ARE AR027 SB THRTL RETURN KIT DUAL SPRINGS

ARE AR185 THROTTLE BRACKET KIT 360 INDY

ARE AR194 TALL THRLT RETURN INDY 360 INTAKE

Home | Phone: 309-745-9558 | Email: information@hughesengines.com