HUG 77929K STD PORT VICTOR HEADS W/INSTALL KIT / PR HEADS WITH VALVES FITTED TO GUIDES & SEAT WORK & BASIC KIT $1894.59
Important: Please read about our preventative operations for this head. Click HERE.
Heads With Valves Fitted To Guides & Seat Work & Basic Kit
This is a pair of finished heads with the valves fitted to the guides, a valve job & seat work but no porting work. The heads comes with 2.20" intake valves and 1.81" exhaust valves
This part number also includes our "Basic Kit".
This includes :
Valley cover (low deck #7799 or raised deck #7798)
Hughes 5698 Pushrod material with ends (unassembled)
Intake Gaskets (3266)
ARP Head Bolts (145-3609)
Be sure to specify 383/400 or 440 block in the comments section of the order form.
The spring kit must be ordered separately.
DESCRIPTION: Designed for race applications using 1961-1978 Chrysler B 361, 383 and 400 c.i.d. and RB 413, 426 wedge and 440 c.i.d.engines. Victor cylinder heads are ideally suited for larger displacement and high RPM applications and feature 280cc intake ports, 100cc exhaust ports, and 72cc, Dual-Quench design combustion chambers to facilitate high compression ratios. The intake ports are raised .650” and the exhaustports are raised .250” to improve flow. The intake port is also extended .950” to eliminate the need for intake manifold spacers. The exhaustflange has been extended out .300” in order to provide dry exhaust bolt/stud holes. Exhaust bolt holes feature helicoil thread inserts for addedstrength and durability. Valve cover rails have also been raised to provide increased rocker arm clearance. Spark plugs have been re-oriented toa 15-degree angle to improve combustion efficiency. The increase inintake port size requires the use of .600" offset intake rocker arms available through us here at Hughes Engines Racing, inc.. Heads will accept standard exhaust rocker arms. These heads use the stock intake,exhaust, and valve cover bolt hole patterns, and stock rocker shafts, for compatibility with original equipment, as well as aftermarket parts.
| Specifications |
|
| Combustion Chamber |
72cc |
| Intake Runner Volume |
280cc |
| Exhaust Runner Volume |
100cc |
| Intake Valve |
2.200" |
| Exhaust Valve |
1.810" |
| Deck Thickness |
5/8" |
| Valve Spring |
N-A |
| Rocker Stud / Guideplate |
N-A |
| Sparkplug |
14mm x 3/4", gasket seat |
Installation instructions for this Edelbrock part can be found at this link. Installation Instructions NOTE: The Edelbrock Victor heads have heli-coils in the rocker hold down stands and in the exhaust bolt holes. The Pro Comp heads do not have heli-coils in any of the bolt holes. |
|
|
 
Related Parts:
HUG 7442 Rocker Hold-Down Stud Kit 
HUG 15153 1.5 Victor Rocker Kit w/Shafts
HUG 15253 1.6 Victor Rocker Kit w/Shafts
FEL 1009 4.410" X .309" Performance Head Gasket
HUG 1128VSK-V 1128 Spring Kit Installed | 
;void(0);)