HUG HEH1019BL HYDRAULIC CAMSHAFT 112º LSA+3 FLAT TAPPET HYDRAULIC / ONE BOLT TIMING GEAR $160.00
 
Flat Tappet Hydraulic / One Bolt Timing Gear. Light to medium towing or RV, street 4x4, dual exhaust, 2 bbl or 4 bbl carb. 150psi suggested cylinder pressure, stock idle. Lots of low end torque for heavy vehicles or medium towing.
|
Intake Valve Lift 1.5
Exhaust Valve Lift 1.5 |
.461"
.489" |
 |
Intake Valve Lift 1.6
Exhaust Valve Lift 1.6 |
.491"
.522" |
|
Intake Duration at .050"
Exhaust Duration at .050" |
210°
219° |
|
| Lobe Separation Angle |
112º |
|
Intake Opening at .050"
Exhaust Opening at .050" |
-4° BTC
44.5° BBC |
|
Intake Closing at .050"
Exhaust Closing at .050" |
34° ABC
-5.5° ATC |
|
| Min. Suggested Cylinder PSI |
150 |
|
| Sweet Spot RPM |
IDLE - 4600 |
Power Ranges: These are the "sweet spot" in the power range. Generally we suggest shifting at 300-500 RPM above the "sweet spot" for the best ET’s.
Spring Warning: Our camshafts are not comparable to other manufacturers and require special valve spring pressures to operate and live satisfactorily. ONLY USE springs meeting the specifications listed here or on the provided cam cards. Valve spring pressures and installed heights are supplied with each camshaft.
Caution: Minimum piston-to-valve clearance is .060" intake and .100" exhaust. If your clearance is not adequate, we have tooling to cut deeper valve reliefs. Check our tooling section or call us. Maximum lift with stock guide height is 0.450", more lift requires shortening the valve guides.
Related Parts:
1510S-16 1.5 Rocker Arm Kit w/Shafts 
1520S-16 1.6 Rocker Arm Kit w/Shafts
7007 Cam Bolt & Washer Combo
3690 Extreme Pressure Oil Additive
5001 Hydraulic Lifter
1302 11/32" Stem 1-Groove Valve Lock
1304 3/8" Stem 1-Groove Valve Lock
3720 20w50 Race Synthetic Blend Oil
1203 11/32" Valve Spring Retainer
1256 3/8" Valve Spring Retainer
1410 6 Pack Rocker Kit
1105 Single W/Damper Valve Spring
6427 1 Bolt Cam, 3 Key Timing Chain Set
6434 1 Bolt Cam, 9 Key Timing Chain Set
| 
My Cart
;void(0);)