HUG HEH1523BL HYDRAULIC CAMSHAFT 112º LSA+3 FLAT TAPPET HYDRAULIC / ONE BOLT TIMING GEAR $160.00
 
Flat Tappet Hydraulic / One Bolt Timing Gear. Light car, mild street: medium to heavy towing or RV. Dual exhaust or headers, 4 bbl carb. Street gearing 3.00 to 3.55:1. 150psi suggested cylinder pressure. Good idle, resto/cruiser. Hot daily driver, mileage OK.
|
Intake Valve Lift 1.5
Exhaust Valve Lift 1.5 |
.470"
.506" |
 |
Intake Valve Lift 1.6
Exhaust Valve Lift 1.6 |
.501"
.539" |
 |
Intake Duration at .050"
Exhaust Duration at .050" |
215°
223° |
 |
| Lobe Separation Angle |
112º |
 |
Intake Opening at .050"
Exhaust Opening at .050" |
-1.5° BTC
46.5° BBC |
 |
Intake Closing at .050"
Exhaust Closing at .050" |
36.5° ABC
-3.5° ATC |
 |
| Min. Suggested Cylinder PSI |
155 |
 |
| Sweet Spot RPM |
1200 - 4800 |
Power Ranges: These are the "sweet spot" in the power range. Generally we suggest shifting at 300-500 RPM above the "sweet spot" for the best ET’s.
Spring Warning: Our camshafts are not comparable to other manufacturers and require special valve spring pressures to operate and live satisfactorily. ONLY USE springs meeting the specifications listed here or on the provided cam cards. Valve spring pressures and installed heights are supplied with each camshaft.
Caution: Minimum piston-to-valve clearance is .060" intake and .100" exhaust. If your clearance is not adequate, we have tooling to cut deeper valve reliefs. Check our tooling section or call us. Maximum lift with stock guide height is 0.450", more lift requires shortening the valve guides.
Related Parts:
1510S-16 1.5 Rocker Arm Kit w/Shafts 
1520S-16 1.6 Rocker Arm Kit w/Shafts 
3690 Extreme Pressure Oil Additive 
5001 Hydraulic Lifter 
1302 11/32" Stem 1-Groove Valve Lock 
1304 3/8" Stem 1-Groove Valve Lock 
3720 20w50 Race Synthetic Blend Oil
1203 11/32" Valve Spring Retainer 
1256 3/8" Valve Spring Retainer 
1410 6 Pack Rocker Kit 
1105 Single w/Damper Valve Spring 
6427 1 Bolt Cam, 3 Key Timing Chain Set 
6434 1 Bolt Cam, 9 Key Timing Chain Set .

|