SEARCH
Part Number
Keywords

Return to Parts List

HUG HEH2832BL

HYDRAULIC CAMSHAFT 110º LSA+3

FLAT TAPPET HYDRAULIC / ONE BOLT TIMING GEAR

$160.00

  Flat Tappet Hydraulic / One Bolt Timing Gear. Street performance and strip: HP exhaust or headers, performance intake 3.70:1 gears, 4 bbl or 3x2, Idles so you know its in there. HP ported Stage I heads 160psi suggested cylinder pressure 2800rpm stall. Very hot daily driver.

 Camshaft Technical Details
Intake Valve Lift 1.5
Exhaust Valve Lift 1.5		 .524"
.540"
Intake Valve Lift 1.6
Exhaust Valve Lift 1.6		 .558"
.576"
Intake Duration at .050"
Exhaust Duration at .050"		 228°
232°
Lobe Separation Angle 110º
Intake Opening at .050"
Exhaust Opening at .050"		 7° BTC
49° BBC
Intake Closing at .050"
Exhaust Closing at .050"		 41° ABC
3° ATC
Min. Suggested Cylinder PSI 165
Sweet Spot RPM 1800 - 5400

 

Note: With any hydraulic camshaft larger than our 1523AL/BL grind, we strongly encourage using adjustable rocker arms. The stock stamped rockers do not have a true 1.5:1 ratio. They will check somewhere between 1.38:1 and 1.45:1 ratio. This will yield a loss of lift (up to .045"), 2°/3° duration loss and also slow the rate-of-lift resulting in a possible 25HP loss. Any camshaft using double valve springs must use adjustable rocker arms to prevent damage when the stock rocker arms break.

Power Ranges: These are the "sweet spot" in the power range. Generally we suggest shifting at 300-500 RPM above the "sweet spot" for the best ET's.

Spring Warning: Our camshafts are not comparable to other manufacturers and require special valve spring pressures to operate and live satisfactorily. ONLY USE springs meeting the specifications listed here or on the provided cam cards. Valve spring pressures and installed heights are supplied with each camshaft.

Caution: Minimum piston-to-valve clearance is .060" intake and .100" exhaust. If your clearance is not adequate, we have tooling to cut deeper valve reliefs. Check our tooling section or call us. Maximum lift with stock guide height is 0.450", more lift requires shortening the valve guides.

 

Related Parts:

1510S-16            1.5 Rocker Arm Kit w/Shafts                      

1520S-16            1.6 Rocker Arm Kit w/Shafts                        

7007                    Cam Bolt & Washer Combo                          

3690                    Extreme Pressure Oil Additive                     

5003                    Racing Lifter                                                 

1302                    11/32" Stem 1-Groove Valve Lock                  

1304                    3/8" Stem 1-Groove Valve Lock                      

1332                    11/32" Stem 1-Groove Valve Lock                 

1334                    3/8" Stem 1-Groove Valve Lock                     

3720                    20w50 Race Synthetic Blend Oil                   

1270                    10º Valve Spring Retainer                            

1203                    11/32" Valve Spring Retainer                          

1256                    3/8" Valve Spring Retainer                             

1106                    Single w/Damper Valve Spring                       

6427                    1 Bolt Cam, 3 Key Timing Chain Set              

6434                    1 Bolt Cam 9 Key Timing Chain Set              

Home