SEARCH
Part Number
Keywords

Return to Parts List

HUG HEH3237BL

HYDRAULIC CAMSHAFT 110º LSA+3

FLAT TAPPET HYDRAULIC / ONE BOLT TIMING GEAR

$160.00

Flat Tappet Hydraulic / One Bolt Timing Gear. Hotter Street performance and strip: HP exhaust or headers, performance intake 3.70:1 gears, 4 bbl or 3x2, Idles so you know its in there. HP ported Stage I heads 160psi suggested cylinder pressure 2800rpm stall. Very hot daily driver.

 Camshaft Technical Details
Intake Valve Lift 1.5
Exhaust Valve Lift 1.5		 .540"
.548"
Intake Valve Lift 1.6
Exhaust Valve Lift 1.6		 .576"
.584"
Intake Duration at .050"
Exhaust Duration at .050"		 232°
237°
Lobe Separation Angle 110º
Intake Opening at .050"
Exhaust Opening at .050"		 9° BTC
51.5° BBC
Intake Closing at .050"
Exhaust Closing at .050"		 43° ABC
5.5° ATC
Min. Suggested Cylinder PSI 165
Sweet Spot RPM 2000 - 5500

Note: With any hydraulic camshaft larger than our 1523AL/BL grind, we strongly encourage using adjustable rocker arms. The stock stamped rockers do not have a true 1.5:1 ratio. They will check somewhere between 1.38:1 and 1.45:1 ratio. This will yield a loss of lift (up to .045"), 2°/3° duration loss and also slow the rate-of-lift resulting in a possible 25HP loss. Any camshaft using double valve springs must use adjustable rocker arms to prevent damage when the stock rocker arms break.

Power Ranges: These are the "sweet spot" in the power range. Generally we suggest shifting at 300-500 RPM above the "sweet spot" for the best ET's.

Spring Warning: Our camshafts are not comparable to other manufacturers and require special valve spring pressures to operate and live satisfactorily. ONLY USE springs meeting the specifications listed here or on the provided cam cards. Valve spring pressures and installed heights are supplied with each camshaft.

Caution: Minimum piston-to-valve clearance is .060" intake and .100" exhaust. If your clearance is not adequate, we have tooling to cut deeper valve reliefs. Check our tooling section or call us. Maximum lift with stock guide height is 0.450", more lift requires shortening the valve guides.

 Related Parts:

1510S-16                   1.5 Rocker Arm Kit w/Shafts                           

1520S-16                   1.6 Rocker Arm Kit w/Shafts                            

7007                          Cam Bolt & Washer Combo                            

3690                          Extreme Pressure Oil Additive                          

5003                          Racing Lifter                                                           

1302                          11/32" Stem 1-Groove Valve Lock                       

1304                          3/8" Stem 1-Groove Valve Lock                            

1332                          11/32" Stem 1-Groove Valve Lock                           

1334                          3/8" Stem 1-Groove Valve Lock                           

3720                          20w50 Race Synthetic Blend Oil                         

1270                          10º Valve Spring Retainer                                   

1203                          11/32" Valve Spring Retainer                                

1256                          3/8" Valve Spring Retainer                                  

1106                          Single w/Damper Valve Spring                             

6427                         1 Bolt Cam, 3 Key Timing Chain Set                      

6434                         1 Bolt Cam, 9 Key Timing Chain Set                     

Home