EDE 21763 INT, PERFORMER SM BLOCK (NON EGR) BLACK DESIGNED FOR STREET 318-340-360 C.I.D. (BLACK POWDER COATED) $521.95
 
Edelbrock Low Rise Dual Plane #2176
Black Powder Coated
PERFORMER 318/360 (idle-5500 rpm)
Designed for street 318-340-360 c.i.d. Chrysler V8s.
Will not fit 1992 and later Magnum engines.
OK for use with 318 heads/ports, works best with the HEH0515AL, HEH1019AL, HEH1523AL, HEH1923AL, and HEH2328AL hydraulic camshafts. This intake manifold has 318 sized intake ports. When using it with 340 or 360 cylinder heads, it must be port matched to achieve proper alignment.
Important... A/B Measurements
CHECKING FOR HOOD CLEARANCE
 
To ensure adequate hood clearance, check the height of your stock manifold and compare the "A" and "B" measurements against those of the Edelbrock manifold prior to purchase. The heights of all Edelbrock manifolds are listed under "Installation Notes" for each model in the intake manifold section of this catalog.
Please Note: To figure carburetor pad height, add dimensions "A" "B" and divide by 2.
This intake Manifold height: A-4.13", B-5.13" see A/B Measurements in above photo. Port exit dimensions: .97" x 1.95".
Factory manifolds have an "A" measurement of approximately:
2 barrels---- 3.54"
4 barrels---- 3.96"
Installation instructions for this intake can be found at this link. Installation Instructions
Related Parts:
ARE AR004 THROTTLE BRACKET KIT 360 
ARE AR027 SB THRTL RETURN KIT DUAL SPRINGS
ARE AR185 THROTTLE BRACKET KIT 360 INDY
ARE AR194 TALL THRLT RETURN INDY 360 INTAKE | 
;void(0);)