Find Your Part:

Return to Parts List

Category : D- Big Block (Low Deck) : Rocker Arms & Accessories : Rocker Arm Kits : Edelbrock Victor Heads

HUG 15153




Includes rockers, spacers and chamfered Shafts

These 1.5 ratio rocker arms are designed exclusively to give you correct geometry with the Edelbrock BB Victor cylinder heads. The exhaust are standard offset and the intakes have a .600" offset.Any less offset and the pushrod is too close to the wall. Any more offset and the pushrod angle becomes an issue. This kit includes all 16 rockers, all of the billet machined spacers, the fine adjustment shims and our chamfered shafts.Cryogenic treament is available to strengthen these rockers to the next level also.  For additional information about cryogenic treatment refer to our tech article. Click on this part number to order the Cryo treated version of this set HUG 15153C

These rockers can be used on Edelbrock Victor, or any big block requiring a .600" offset intakes.
  • Our big block rockers will clear 1.625" diameter valve springs without cutting or grinding. (When the geometry is correct)

     Why not use a set of Stainless Steel Rockers?  Better read this first.  CLICK HERE 

    Why do you need our rockers??? Check out the tech article

    If you will be running spring pressures of close to 600# or more, we strongly suggest having your components cryogenically treated.

    Customer Testimonials:
    "Just yesterday I completed setting up a set fo your rockers on my engine. Man these things are beautiful! At 1,000 RPM on an electric drill the oiling to the pushrod and rocker tip was unreal. These are the greatest innovation to Mopar valve train that I have seen in the last 20 years. Plus, they are at a price the average person can afford. Keep up the good work! "   Hull Motorsports  Ellenwood, GA

       "Just wanted to say thank you for a great rocker set-up. After a failure "3rd dyno pull" with the pretty gold ones, I upgraded to your's and could not be more pleased. These really hold their adjustment and its a kick to see the reaction when you say they are Cryogenically treated.
    They sure help with the consistency--made it "under dog car"  to Pinks final 16 in Kent Wa"

    Thanks ,  M. Newman Olympia, WA

    "I have a set of your 1.5 rockers (non-cryogenic) on a set of victor heads on a 505ci stroker with a .682" lift solid roller cam. Just wanted you to know that they survived 2 seasons of racing with the incorrect valve springs that were installed on my heads by the machine shop I used. Spring pressures were 360# on the seat and 830# open when they should have been closer to 250# and 600#. I have since changed springs and re-used the rockers." K.N. Texas


  • HUG 7440VIC      Shaft Hold Down Kit - EDLRPM
    HUG 7442TF       Shaft Hold Down Kit -Trick Flow
    HUG 1710           Rocker Stand Shim Kit                               

    Home | Phone: 309-745-9558 | Email: