Find Your Part:
Search
OR


Return to Parts List

Category : D- Big Block (Low Deck) : Intake Manifolds : Performer : Stock

EDE 2186

INTAKE, PERFORMER LOW DECK 4150

DESIGNED FOR STREET 361-383-400 C.I.D. (IDLE-5500 RPM)

$379.95

PERFORMER 383 (idle-5500 rpm)
Designed for street 361-383-400 c.i.d. Chrysler V8s that measure 7.75" across block. For EGR, #2186 is stock replacement/street legal part for 400 V8s with OEM 4-bbl. carb.; 1972-78. For non-EGR, #2186 is stock replacement/street legal part for 361-383-400 V8s with OEM 4-bbl. carb.; 1966-72 (1973 non-CA); except stock equipped EGR. May be used with OEM or aftermarket carbs

Important... A/B Measurements
CHECKING FOR HOOD CLEARANCE

To ensure adequate hood clearance, check the height of your stock manifold and compare the "A" and "B" measurements against those of the Edelbrock manifold prior to purchase.

Please Note: To figure carburetor pad height, add dimensions "A" "B" and divide by 2.

This intake Manifold height: A-3.65", B-4.35", measured to engine block, see A/B Measurements in above photo. Port exit dimensions: 1.14" x 2.12".

A stock low deck big block intake manifold has an "A" measurment of approximately 2.815" .

Will not fit 1962-64 Max Wedge heads. Carb center to carb center: 6-7/16". Manifold measures 8.75" across block.

Installation instructions for this intake can be found at this link. Installation Instructions

Related Parts:

ARE AR002B THROTTLE BRACKET KIT 383

ARE AR008 BB THRTTL RETURN BRKT DUAL SPRNGS

Home | Phone: 309-745-9558 | Email: information@hughesengines.com