| Find Your Part:OR
| Return to Parts List | Category : D- Big Block (Low Deck) : Pushrods : Non-Oil Through | HUG 5898 10.000" X 3/8" X .083" WALL PUSHROD 9.850" TUBE LENGTH - UNFINISHED 4130 MATERIAL HEAT TREATED $18.75
 4130 Hard Tempered Chrome Moly .083" Wall ThicknessHard tubular construction. For use with adjustable rocker arms and hydraulic or solid camshafts. One end is loose and is available as a cup or ball style. Please specify when ordering which style end you require. Use with valve springs having a maximum open pressure of up to 850lbs. Sold individually. Length of the overall pushrod unfinished is 9.850"
| Tube Material |
Heat Treat ? |
Max Recommended load** |
| 5/16" 0.049" Wall |
No |
400 pounds |
| 5/16" 0.049" Wall |
Yes |
500 pounds |
| 5/16" 0.083" Wall |
Yes |
750 pounds |
| 3/8" 0.049" Wall |
No |
400+ pounds |
| 3/8" 0.049" Wall |
Yes |
500+ pounds |
| 3/8" 0.065" Wall |
Yes |
750 pounds |
| 3/8" 0.083" Wall |
Yes |
900 pounds |
The proper pushrod length ensures that you can obtain maximum lift from your camshaft and have the most stable valve train for high RPM operation. If you are unsure about what pushrod length you need, use our length-checking-pushrod tools (Contact us for details). Remember, just because your rocker arms may have an adjusting screw it does not mean the screw is there to make up for a pushrod that is too long or short. The adjusting screw is only to set lifter preload or valve lash.
|
|
|
Home | Phone: 309-745-9558 | Email: information@hughesengines.com |
;void(0);)