EDE 5076 INTAKE, TORKER II SMALL BLOCK HIGH PERFORMANCE SINGLE PLANE INTAKE (NON EGR) $425.95
 
Edelbrock Single Plane #5076
TORKER II 340/360 (2500-6500 rpm)
Designed for high performance street 340-360 c.i.d. Chrysler V8s. Manifold not equipped with EGR. Can be used on 318 c.i.d. if 340-360 c.i.d. cylinder heads are used. Not for heavy vehicles. Will not fit 1992 and later Magnum engines.
Use this intake in place of the Performer RPM and Air-Gap intakes for a slightly higher RPM range. Camshaft choices are similar also. It works well with the HEH2832AL, HEH3237AL, HEH3742AL, HEH4246AL, and HEH4650AL hydraulic camshafts. Good solid camshaft choices are the HTL3742AS, HTL4248AS, HTL4652AS, HTL4852AS and HTL5256AS.
Important... A/B Measurements
CHECKING FOR HOOD CLEARANCE
 
To ensure adequate hood clearance, check the height of your stock manifold and compare the "A" and "B" measurements against those of the Edelbrock manifold prior to purchase. The heights of all Edelbrock manifolds are listed under "Installation Notes" for each model in the intake manifold section of this catalog.
Please Note: To figure carburetor pad height, add dimensions "A" "B" and divide by 2.
This intake Manifold height: A-5.25", B-6.19" see A/B Measurements in above photo. Port exit dimensions: 1.00" x 2.17".
Factory manifolds have an "A" measurement of approximately:
2 barrels---- 3.54"
4 barrels---- 3.96"
Installation instructions for all Edelbrock parts can be found at this link. Installation Instructions
Related Parts:
ARE AR004 THROTTLE BRACKET KIT 360 
ARE AR027 SB THRTL RETURN KIT DUAL SPRINGS
ARE AR185 THROTTLE BRACKET KIT 360 INDY
ARE AR194 TALL THRLT RETURN INDY 360 INTAKE | 
;void(0);)