Find Your Part:
Search
OR


Return to Parts List

Category : A- Small Block "LA" : Camshaft : Hydraulic Roller : Street / Strip

HUG SER0814ALN-10

SB HYD RLR CAM 208/214 -110šLSA NEW CORE

LONG SNOUT & DRILLED FOR OILING WITH .327"/"333" LOBE LIFT

$369.00


Hughes "SteamRoller" Cam


This is a long snout cam. It works fine in the  93-03 Magnum engine but you will need to use our HUG7011 Cam bolt & washer and the HUG7542 cam key (see below in Related Parts).

Hydraulic roller small block camshaft.

Basic guidelines  (These are not absolutes, just guidelines to help you get close on a cam choice)
Use: Mild street, works well with stock heads and upgraded throttle body/carb
Idle: some sound. You will know it's not stock
Vacuum: mid to high
Converter: Stock to mild stall
Rear gear: Stock to 3.55
Benefits: Good supercharger cam
Requires a computer upgrade (like a tuner)

     



Related Parts:


Lifters
: Magnum Blocks Standard performance use HUG 5006  High performance use HUG 5007
             LA Blocks use HUG 5321

Spring Upgrade Kit: HUG 1199 - Includes HUG 1110 Valve Springs, HUG 1278 Retainers, and HUG 1307B Locks.

Valve Springs: For 1.5 or 1.6 ratio rockers use HUG 1110

Valve Locks:    For 5/16" stem use  HUG 1307B
                          For 11/32" stem use HUG 1302    For 3/8" stem use HUG 1304

Retainers:  For 5/16" stem use HUG 1278
                    For 11/32" stem use HUG 1202    For 3/8" stem use  HUG 1252

Rocker Arm Kits: On Magnum iron heads use HUG 1550 or HUG 1555
                             
On Magnum Edelbrock Heads use HUG 1560 or HUG 1555A
                              On standard LA style heads use 1.5 ratio HUG 15023  For 1.6 ratio use HUG 15063

Cam Key: For LA or Magnum engines use    HUG 7542                 

Cam bolt & washer: HUG 7011

Timing Chain & Gear Set: 3 key way use HUG 6440 or for a 7 keyway use HUG 6442

Home | Phone: 309-745-9558 | Email: information@hughesengines.com