HUG SER1418ALN-10 SB HYD RLR CAM 214/218 -110šLSA NEW CORE LONG SNOUT & DRILLED FOR OILING WITH .333"/.337" LOBE LIFT $446.85
Hughes "SteamRoller" Cam
[NOTE:To run this cam with the factory fuel injection, you MUST reprogram your E.C.U.!!!]
This is a long snout cam. It works fine in the 93-03 Magnum engine but you will need to use our HUG7011 Cam bolt & washer and the HUG7542 cam key (see below in Related Parts).
Hydraulic roller small block camshaft.
Scroll down to hear this cam in a truck.
Basic guidelines (These are not absolutes, just guidelines to help you get close on a cam choice)
Use: Hot Street, works well with stock heads and upgraded throttle body/carb
Idle: Rough-ish
Vacuum: mid
Converter: Stock to mild stall
Rear gear: Stock to 3.55
Requires a Tuner
  
Related Parts:
Lifters: Magnum Blocks Standard performance use HUG 5006 High performance use HUG 5007
LA Blocks use HUG 5321
Spring Upgrade Kit: HUG 1199 - Includes HUG 1110P Valve Springs, HUG 1278 Retainers, and HUG 1307B Locks.
Valve Springs: For 1.5 or 1.6 ratio rockers use HUG 1110P
Valve Locks: For 5/16" stem use HUG 1307B
For 11/32" stem use HUG 1302 For 3/8" stem use HUG 1304
Retainers: For 5/16" stem use HUG 1278
For 11/32" stem use HUG 1202 For 3/8" stem use HUG 1252
Rocker Arm Kits: On Magnum iron heads use HUG 1550 or HUG 1555
On Magnum Edelbrock Heads use HUG 1560 or HUG 1555A
On standard LA style heads use 1.5 ratio HUG 15023 For 1.6 ratio use HUG 15063
Cam Key: For LA or Magnum engines use HUG 7542
Cam bolt & washer: HUG 7011
Timing Chain & Gear Set: 3 key way use HUG 6440 or for a 7 keyway use HUG 6442 | 
;void(0);)