Find Your Part:
Search
OR


Return to Parts List

Category : A- Small Block "LA" : Camshaft

HUG SEH3236AL-8

SB HYD FLAT TAPPET CAM 232/236 -108šLSA

LOBE LIFT .357"/.364"

$165.00

Flat tappet hydraulic small block "LA" camshaft.

Hughes "real" Chrysler cam

Basic guidelines  (These are not absolutes, just guidelines to help you get close on a cam choice)
Use: Hotter street performance and strip. Ported heads w/ oversize valves. Headers & performance intake.
Idle: Noticable
Vacuum: Medium
Converter: 2800rpm +
Rear gear: 3.70 +
Benefits: Very hot daily driver, good first strip cam.

    
Be sure to check out our NO FLAT CAM GUARANTEE!
       CLICK HERE BEFORE ORDERING

     



Related Parts:

Lifters
: Use High performance HUG 5003

Valve Springs: For all ratio rocker arms use  HUG 1129 Note: Spring base must be machined flat on OEM heads. Both springs must set on the same surface.

Valve Locks: For 11/32" stem use HUG 1302    For 3/8" stem use HUG 1304 for single-groove, HUG 1346 for multi-groove.

Retainers: For 11/32" stem use HUG 1202    For 3/8" stem use  HUG 1252

Rocker Arm Kits: On standard style heads use 1.5 ratio HUG 15023  For 1.6 ratio use HUG 15063

Break-in Oil: 5W30 JGP 01806    or  15W50 JGP 00106

Cam Key: HUG 7542

Cam bolt & washer: HUG 7011

Timing Chain & Gear Set: 3 key way use HUG 6440 or for a 7 keyway use HUG 6442

 

Home | Phone: 309-745-9558 | Email: information@hughesengines.com