HUG SEH2428BL-11 BB HYD FLAT TAPPET CAM 224/228 -111šLSA LOBE LIFT .345"/.353" $241.25
Flat tappet hydraulic big block "B/RB" camshaft.
Hughes "real" Chrysler cam
This is a one bolt cam. Three bolts are available as special order.
Basic guidelines (These are not absolutes, just guidelines to help you get close on a cam choice)
Use: Mild street performance or hot HP restoration engines. Likes some head work & oversize valves.
Idle: Smooth to noticable
Vacuum: Medium level
Converter: Stock to mild stall
Rear gear: 3.55 +
Benefits: Hotter daily driver.
Be sure to check out our NO FLAT CAM GUARANTEE!
CLICK HERE BEFORE ORDERING
Grind Number:
|
SEH2428BL-11
|
|
|
|
|
|
Lobe Separation:
|
111º
|
|
Installed Centerline:
|
107º
|
|
|
|
|
|
|
Intake
|
Exhaust
|
|
Lobe Lift:
|
0.345
|
0.353
|
|
Valve Lift w/ 1.5 Ratio:
|
0.518
|
0.530
|
|
Valve Lift w/ 1.6 Ratio:
|
0.552
|
0.565
|
|
|
|
|
|
Strandard PreLoad
|
.080" - .095"
|
|
|
|
|
|
Duration @ .050"
|
224º
|
228º
|
|
|
|
|
|
Cam Timing @ .050" Tappet Lift
|
|
|
|
Intake
|
Exhaust
|
|
Opens:
|
5º BTC
|
49º BBC
|
|
Closes:
|
39º ABC
|
-1º ATC
|
|
|
|
|
|
Valve Spring Requirements
|
|
|
Rocker Spring Closed Open
|
Ratio P/N Pressure Pressure
|
1.5 1106 150#@1.880" 365#@1.280"
|
1.6 1106 150#@1.880" 365#@1.280"
|
|
|
|
Ph:(309)745-9558
|
Fax:(309)296-9990
|
Related Parts:
Lifters: Standard performance use HUG 5001 High performance use HUG 5003
Valve Springs: For 1.5 or 1.6 ratio rockers use HUG 1106
Valve Locks: For 11/32" stem use HUG 1302 For 3/8" stem use HUG 1304
Retainers: For 11/32" stem use HUG 1203 For 3/8" stem use HUG 1256
Rocker Arm Kits: On standard style heads use 1.5 ratio HUG 15103 For 1.6 ratio use HUG 15203
Break-in Oil: 5W30 JGP 01806 or 15W50 JGP 00106
Cam bolt & washer: HUG 7007
Timing Chain & Gear Set: 3 key way use HUG 6427 or for a 9 keyway use HUG 6434
|