HUG SEH5660BL-8 BB HYD FLAT TAPPET CAM 256/260 -108šLSA LOBE LIFT .393"/.401" $241.25
Flat tappet hydraulic big block "B/RB" camshaft.
Hughes "real" Chrysler cam
This is a one bolt cam. Three bolts are available as special order.
Basic guidelines (These are not absolutes, just guidelines to help you get close on a cam choice)
Use: Use when rules require a hydraulic cam. Otherwise upgrade to a solid or roller. Very high compression stock stroke or stroker engine. Fully race ported heads w/ oversize valves. Headers & performance intake.
Idle: Very Noticable
Vacuum:Low
Converter: 4000rpm +
Rear gear: 4.56 +
Benefits: Incredible mid-range & top end power. Street/Strip in 500+c.i. strokers
Be sure to check out our NO FLAT CAM GUARANTEE!
CLICK HERE BEFORE ORDERING
Grind Number:
|
SEH5660BL-8
|
|
|
|
|
|
Lobe Separation:
|
108º
|
|
Installed Centerline:
|
104º
|
|
|
|
|
|
|
Intake
|
Exhaust
|
|
Lobe Lift:
|
0.396
|
0.404
|
|
Valve Lift w/ 1.5 Ratio:
|
0.594
|
0.606
|
|
Valve Lift w/ 1.6 Ratio:
|
0.634
|
0.646
|
|
|
|
|
|
Standard PreLoad
|
.080" - .095"
|
|
|
|
|
|
Duration @ .050"
|
256º
|
260º
|
|
|
|
|
|
Cam Timing @ .050" Tappet Lift
|
|
|
|
Intake
|
Exhaust
|
|
Opens:
|
24º BTC
|
62º BBC
|
|
Closes:
|
52º ABC
|
18º ATC
|
|
|
|
|
|
Valve Spring Requirements
|
|
|
Rocker Spring Closed Open
|
Ratio P/N Pressure Pressure
|
1.5 1106 150#@1.880" 365#@1.230"
|
1.6 1106 150#@1.880" 365#@1.230"
|
|
|
|
Ph:(309)745-9558
|
Fax:(309)296-9990
|
Related Parts:
Lifters: Standard performance use HUG 5001 High performance use HUG 5003
Valve Springs: For 1.5 or 1.6 ratio rockers use HUG 1106
Valve Locks: For 11/32" stem use HUG 1302 For 3/8" stem use HUG 1304
Retainers: For 11/32" stem use HUG 1203 For 3/8" stem use HUG 1256
Rocker Arm Kits: On standard style heads use 1.5 ratio HUG 15103 For 1.6 ratio use HUG 15203
Break-in Oil: 5W30 JGP 01806 or 15W50 JGP 00106
Cam bolt & washer: HUG 7007
Timing Chain & Gear Set: 3 key way use HUG 6427 or for a 9 keyway use HUG 6434
|