HUG STL7276AS-6 SB SLD FLAT TAPPET CAM 272/276 -106šLSA .426"/.434" LOBE LIFT $206.87
Flat tappet solid small block "LA" camshaft.
Hughes "real" Chrysler cam
Basic guidelines (These are not absolutes, just guidelines to help you get close on a cam choice)
Use: Drag Strip. Hi-rise single plane intake. Fully ported race heads. High compression. Very light cars or dragsters
Idle: Noticable
Converter: 5000 rpm +
Rear gear: 4.10+
Be sure to check out our NO FLAT CAM GUARANTEE!
CLICK HERE BEFORE ORDERING
Related Parts:
Lifters: Standard lifters use HUG 5012 . For high performance lifters with EDM oil hole use HUG 5012EDM . Lightweight with EDM hole use HUG 5013XL
Valve Springs: All ratio rockers use HUG 1129 Note: Spring base must be machined flat on OEM heads. Both springs must set on the same surface.
Valve Locks: For 11/32" stem use HUG 1322 For 3/8" stem use HUG 1324
Retainers: For 11/32" stem use HUG 1203 For 3/8" stem use HUG 1254
Rocker Arm Kits: On standard style heads use 1.5 ratio HUG 15023 For 1.6 ratio use HUG 15063
Break-in Oil: 5W30 JGP 01806 or 15W50 JGP 00106
Cam Key: HUG 7542
Cam bolt & washer: HUG 7011
Timing Chain & Gear Set: 3 key way use HUG 6440 or for a 7 keyway use HUG 6442
|